 |
 |
Combination Lamp - 100mm x 100mm x 22mm |
|
Description
Send to friend
Reviews
Accessories
These lamps are fully submersible, rust proof, shock resistant and feature a diamond lens pattern. The circuit borad is fully encased in resin with corrosion protected tinned copper wiring. Specially designed male and female 4 pin plugs, compatible with the plug in and drive away cable system.
| Part No. | 100BAR | 100BARB | 100BAR10 | 100BARLP | 100ARM | 100ARM10 |
|---|---|---|---|---|---|---|
| Type | Stop/Tail Indicator Reflector |
Stop/Tail Indicator Reflector (Black PCB) |
Stop/Tail Indicator Reflector |
Stop/Tail Indicator Reflector Licence |
Stop/Tail Indicator Reflector |
Stop/Tail Indicator Reflector |
| Voltage | 12 volt | 12 volt | 12 volt | 12 volt | 12-24 volt | 12-24 volt |
| Cable | 40cm with plugs |
40cm with plugs |
10 metres | 40cm with plugs |
40cm with plugs |
10 metres |
| Current | @ 13.8 volts (Stop - 0.13 Amps) (Tail - 0.04 Amps) (Ind - 0.12 Amps) (Licence - 0.03 Amps) @ 28 volts (Stop - 0.12 Amps) (Tail - 0.06 Amps) (Ind - 0.07 Amps) |
|||||
| Warranty | Lifetime warranty | |||||
| Fitting | Surface mount onto flat surface vertically with indicator at top using bolts in back of lamp. Run wire and plug through 10mm hole in fixing surface. Please refer to ADR 13/00 for mounting instructions. | |||||
|
|
||||||||
|
|
||||||||
|
|
||||||||
|
|
